Home » Cosmetology Hair-cutting Classes

Cosmetology Hair-cutting Classes

 

There will be 9 Different Hair cuts Students will learn in class.

 

Image result for 45 degree haircut picturesImage result for holding comb and scissor while cutting hairKeep cseers and comb in a neutral position while cutting hair

  • How to do a Zero Degree Blunt hair cut

  • Please keep your sheers and comb in a neutral position …

  • A Horizontal 45 degree elevation He had a little bit of problem with hair hanging out at the end of his wet hair cut, the problem was the sectioning. Practice your sectioning and you will not have problems.

  • B How to do a 45 Degree Hair Cut.  You can decide which guide you will be using when you cut the front of the hair line.

  • Ideas for your future hair cuts short hair style 2016 Haircut 45 degree long hair style 2017

  • How to do a 90 Degree Hair Cut

Short 45 degree hair cut Wash the hair and section it into standard four-quadrant sections. how to Prep and Section for a Bob Haircut.

 

 

Congratulation to all our Cosmetology students in the Fantasy Competition 2016-2017 .

fantasy-completition-09-30-16-3 fantasy-competition-09-30-16-2 fantasy-competition-09-30-16-1

 

GRADUATED HAIRCUT

Graduated haircut A graduated shape or wedge, an effect or haircut that results from cutting the hair with tension, low to medium elevation. The most common elevation is 45-degrees. In a graduated haircut, there is a visual buildup of weight in a given area.  The ends of the hair appear to “stacked.” There are many variations and effects you can create with graduation simply by adjusting the degree of elevation, or your cutting line. A graduated shape or wedge, an effect or haircut that results from cutting the hair with tension, low to medium elevation. The most common elevation is 45-degrees. In a graduated haircut, there is a visual buildup of weight in a given area. The ends of the hair appear to “stacked.” There are many variations and effects you can create with graduation simply by adjusting the degree of elevation, or your cutting line.

3 Implements and Materials Towels Towels Cutting and Shampoo Cape Cutting and Shampoo Cape Shampoo and Conditioner Shampoo and Conditioner Wide-Tooth Comb Wide-Tooth Comb Four Sectioning Clips Four Sectioning Clips Haircutting Shears Haircutting Shears Water Bottle Water Bottle

4 Preparation Perform the client consultation and hair analysis Perform the client consultation and hair analysis Drape the client Drape the client Shampoo and condition the hair as necessary Shampoo and condition the hair as necessary Begin a blunt cut to guide line at zero degrees Begin a blunt cut to guide line at zero degrees

5 Safety Precautions Sanitize shears before using Sanitize shears before using Palm shears when combing the hair Palm shears when combing the hair

6 Relevance This Haircut is incorporated into many different Hair cuts This Haircut is incorporated into many different Hair cuts

7 Introduction In this basic haircut, you will be working with a horizontal cutting line and a 45- degree elevation. In this basic haircut, you will be working with a horizontal cutting line and a 45- degree elevation. You will be using a stationary guide and a traveling guideline You will be using a stationary guide and a traveling guideline

8 Stationary Guide A guideline that does not move. All other sections are combed toward the guideline and are cut to match it A guideline that does not move. All other sections are combed toward the guideline and are cut to match it

9 Traveling Guideline Moves with you as you work through the haircut Moves with you as you work through the haircut

10 Activity Here’s a great way to understand what a graduated haircut looks like. Hold a telephone book by the spine with the pages hanging down. The edges of the pages make a straight line, just like a blunt cut Here’s a great way to understand what a graduated haircut looks like. Hold a telephone book by the spine with the pages hanging down. The edges of the pages make a straight line, just like a blunt cut Now turn the book the other way, open it in the middle, and let the pages flop down on either side. The edges of the pages make a beveled line, just like a graduated haircut Now turn the book the other way, open it in the middle, and let the pages flop down on either side. The edges of the pages make a beveled line, just like a graduated haircut

11 Procedure 1. Section the hair into four sections.

12 1a. Take a horizontal part from one ear to the other across the nape area, about 1 inch above the hairline. This section is your horizontal guide line.

13 2. Make sure your guideline is correct. 2. Make sure your guideline is correct.

14 3. Working upward in each back section, measure and part off the first horizontal section approximately 1 inch wide

15 4. Beginning at the center part, establish a vertical subsection approximately ½ inch wide, no wider than the second knuckle 4. Beginning at the center part, establish a vertical subsection approximately ½ inch wide, no wider than the second knuckle Extend the subsections down to include the nape guideline. Comb the subsection smooth at a 45-degree angle to the scalp. Hold your fingers at a 90-degree angle to the strand and cut. Extend the subsections down to include the nape guideline. Comb the subsection smooth at a 45-degree angle to the scalp. Hold your fingers at a 90-degree angle to the strand and cut.

16 5. Proceed to cut the entire horizontal section by parting off vertical subsections and cutting in the same manner as step 4. Check each section vertically and horizontally throughout the haircut. Each completed section will serve as a guideline for the next section

17 6. Part off another horizontal section approximately 1 inch wide. Beginning at the center, create another vertical subsection that extends down and includes the previously cut strand. Comb the hair smoothly at a 45-degree elevation to the head. Hold the fingers and shears at a 90-degree angle to the subsection and cut. Cut the entire horizontal section in this manner. Make sure 2 nd section blends with previously cut section.

18 7. Continue taking horizontal sections throughout the left and right back sections and follow the same cutting procedure. The hair will gradually get longer as it reaches the apex (highest point on the top of your head)

19 8. Maintain the length in the crown by continuing to hold the hair at a low elevation 45-degree angle

20 9. Establish a narrow guide section on the left side at the hairline approximately ½ inch wide. The side guideline should be the same length as the nape. Move to the right side of the head and establish a matching guideline there. This will help ensure that both side sections will be the same length when the right side section is cut later.

21 10. Establish a ½ inch side section that curves and follows the hairline above the ear back to the nape section. Smoothly comb the section, including the side guideline and part of the nape section.

22 11. Holding the hair with little or no tension, cut the hair from the nape guide to the side guide. Note the fingers are held at a slight angle to connect the two guides.

23 12. Establish a horizontal section on the left side. The width of this section will vary because of the irregular hairline around the ear

24 13. Starting at the ear, part a ½ inch vertical subsection, Include the underlying guideline and a small portion of the nape section.

25 14. Continue the same cutting procedure followed thus far. Take vertical subsections, comb smoothly, elevate at a 45-degree angle from the head, holding the fingers at a 90-degree angle to the strand. Cut the section even with the side guideline and nape section. Be sure to hold the vertical subsections straight out from the head at a 45-degree, not pulled to the right or left.

26 15. Continue establishing horizontal sections on the left side of the head and following the same cutting procedure. Check each section horizontally to ensure the ends are evenly blended. Add strands from the back section when checking to ensure that the two sections are uniform in length

27 16. When the left side is complete, the strands in the uppermost part of the section should be the same length as those in the upper crown area.

28 17. Move to the right side of the head and cut the hair in the same manner as you did the left side, using the previously established guide. Once the back and both sides are complete, move to the fringe and top area.

29 18. Blow dry the hair cut and view the design, movement, and evenly blended ends.

30 Completion 19. Offer a re-book visit; recommend retail products; discard non-reusable materials, disinfect implements, arrange work station in proper order and sanitize hands

%d bloggers like this: